Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 04-02-2014, 16:14   #1
Registered User
Jake001's Avatar

Join Date: May 2012
Location: Kemah
Boat: Columbia 34 Mk II
Posts: 3
Slipped compression post

Hi all,

I'm looking at purchasing a 1994 Hunter 33.5. After removing the inspection panel for the compression post, I found what looks like a slipped fitting between the deck plate and the post. My rigger is coming out tomorrow for an inspection but I thought I'd check with forums for some feedback.
Jake001 is offline   Reply With Quote


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 00:03.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.