Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 10-07-2013, 04:38   #1
Registered User
 
Capn Morgan's Avatar

Join Date: Jul 2009
Location: South East Asia
Boat: Hans Christian 48T
Posts: 381
Shroud tangs

And so back to asking this learned forum.

The pictures attached show the tangs on the mast. I need to disassemble them but I can't figure them out. The screw at the top seems to release the aluminium cover, but this is still retained by the plate which seems to be the end of the pin that goes into the mast. The top end of the plate is bent into a recess on the cover which stops it from rotating. I didn't want to force it out of the recess in fear of breaking something.

Any ideas? Thanks in advance.
Attached Thumbnails
Click image for larger version

Name:	Tang 1 (1280x956).jpg
Views:	150
Size:	389.9 KB
ID:	63849   Click image for larger version

Name:	Tang 2 (1280x956).jpg
Views:	169
Size:	266.1 KB
ID:	63850  

__________________
Capn Morgan
'If you can fill the unforgiving minute with sixty seconds' worth of distance run...'
Capn Morgan is offline   Reply With Quote
Reply

Tags
shroud

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Advertise Here


All times are GMT -7. The time now is 02:23.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.