I would like to change the
rigging on my 10mt sailing
boat. Could someone quote me for the below specs? Or point me in the right direction for someone who can?
The
boat is now in
Jacksonville - so a local would be great
The upper side of the wires the terminal are pressed while in lower side Norseman are installed.
I would like to have a quote for the following, any information please don't hesitate top contact me
Attached are the measurements of the wire that we are looking to change:
1 wire ; 8mm diameter, length 13.80m
swage eye terminal
1 wire ; 7mm diameter, length 13.10 m
swage eye terminal
2 wire ; 8mm diameter, length 5.52 m
stem ball (35mm diameter) terminal
2 wire ; 8mm diameter,, length 5.6 m
stem ball (35mm diameter) terminal
2 wires; 6mm diameter, length 10.10 m
stem ball (25mm diameter) terminal
2 wires; 7mm diameter, length 13.55 m
stem ball (25mm diameter) terminal
Sent from my
iPhone using Cruisers Sailing Forum