Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 04-08-2014, 15:17   #46
Registered User
Terra Nova's Avatar

Join Date: Apr 2007
Location: Marina del Rey, California
Boat: Freya 39 cutter- Terra Nova
Posts: 3,835
Re: Is this Crevice Corrosion or a Bad Casting?

Anything can be broken with enough force.

When installing any high-load item, as I mentioned in your other thread, it is important to fit a proper backing plate and spacer.

1st rule of yachting: When a collision is unavoidable, aim for something cheap.
"whatever spare parts you bring, you'll never need"--goboatingnow
"Id rather drown than have computers take over my life."--d design
Terra Nova is offline   Reply With Quote


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
JB Marine Weld and Crevice Corrosion rognvald Construction, Maintenance & Refit 17 07-07-2014 09:53
Rudder Stock Crevice Corrosion Cruisin Cat Construction, Maintenance & Refit 15 29-04-2013 16:57
Crevice Corrosion On Rudder Stock stevensuf Construction, Maintenance & Refit 4 19-10-2012 12:07
Crevice Corrosion - Is My Rudder Toast ? funjohnson Construction, Maintenance & Refit 41 14-11-2011 21:14
Crevice Corrosion Triton318 Construction, Maintenance & Refit 6 05-10-2008 13:37

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 07:10.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.