Double cup

[roberto11]

Hi everyone!
The upper shrouds on my boat are 7mm but curiously the stemball head is 26mm diameter and go with a 34mm ext diameter cup.
I wasn't able to find any swage fitting like this!

Seems that the stemball for the 7mm is 21mm head diameter (26mm cup) and the stemball I should install is for the 8mm wire.
Should I go one size up and install a 8mm wire with the correct head or is possible to put two cup on the same wire as somebody suggested me??
The normal cup for the 7mm wire head + a bigger cup that will fit on the Isomat must head.
Or is it just possible to find somewhere the correct swage fitting??
Thank you
Roberto


Sent from my iPhone using Cruisers Sailing Forum

[david samuelson]

Hi Roberto. I believe KZ Marine, who sell terminals under the name SeaRig, have 2 models for 7mm wire: 20mm and 28mm head diameters. They used to, anyway.
They are in New Zealand. Hope this helps. David