Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 30-04-2011, 06:17   #16
Registered User
 
cburger's Avatar

Join Date: May 2006
Location: Nyack, NY
Boat: Westsail 32
Posts: 1,694
Images: 1
Re: Cutter Rig Sailplan

Here is a great link on the history and subject of cutters:

The Gaff Rig Handbook: History ... - Google Books
cburger is offline   Reply With Quote
Old 02-05-2011, 08:54   #17
Registered User
 
PeregrineSea's Avatar

Join Date: Sep 2010
Location: Charlestown
Boat: Stevens Custom 40
Posts: 72
Images: 6
Re: Cutter Rig Sailplan

PEREGRINA is cutter rigged, with a 120% jib. Going to tight windward we rarely use the staysail, crack off a bit and the staysail - which is on a furler -makes a difference. Where the staysail does the best is motorsailing, and in heavy weather, flying alone If I were getting a new jib sail probably a 110 - cut a bit higher. I think Code Zeros are useful - The Peregrine Sea: Adding a Code Zero - we have one on a two part halyard, that we can use board off or as tight in as a very close reach. We just added a "Bast Reacher" for heavier air.
__________________
Tim Robison

https://blog.peregrinesea.com
PeregrineSea is offline   Reply With Quote
Reply

Tags
cutter


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cutter Rig: Staysail Setup w32honu Deck hardware: Rigging, Sails & Hoisting 6 26-04-2011 13:48
Running Backstay on Cutter Rig Sergy Monohull Sailboats 42 24-10-2010 15:21
Is the Yankee a Necessity for a Cutter Rig? ecojimbo Deck hardware: Rigging, Sails & Hoisting 2 18-08-2009 05:44
Cutter-rig C--man Multihull Sailboats 11 11-03-2009 16:12
Fractional cutter rig NoTies Construction, Maintenance & Refit 12 12-01-2006 18:01

Advertise Here


All times are GMT -7. The time now is 09:55.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.