Cruisers Forum
 


Join CruisersForum Today

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 07-03-2013, 11:23   #1
Registered User

Join Date: Oct 2009
Location: St. Petersburg, Fl.
Boat: Cambria 44/46
Posts: 101
Tail piece washers

The CP- current project- has 10 groco tapered plug bronze seacocks and removable tail pieces. All of which need the fiber washers renewed. I've had two leak and made a washer for one out of thick rubber sheet and used a large diameter O-ring on the other. Both are dry but I'm leery of over tightening them.

Any experience with this? 'Seems I just can't pop down to the local West Marine for the stock washers.

Thanks,
Dennis
DennisDW is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 01:56.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.