SS Hose Clamp Contacts

Pelagic · 22-10-2008, 10:56

Finding good quality SS Hose clamps in the Philippines with stainless screws is almost impossible and if you do find the odd one, they might as well be gold plated!

I need to build up my inventory and will order from US or Australia a large assortment.

Any recommendations as to manufacturer and supplier? ….thanks!

**Boracay** · 22-10-2008, 14:47

I have found that buying hose clamps in Australia is very much a case of take what you are given and like it, with no single source supplying all sizes.
The ones that I have brought have been expensive and of unknown quality, particularly the large (around 102mm) "superclamps".
If you can get an order to one of the reputable manufacturers in the USA I'd go that way.

btrayfors · 22-10-2008, 14:56

AWAB brand hose clamps are 316 stainless steel. Lots of places sell them. Try, e.g., Defender: Awab Hose Clamps

Bill

svHyLyte · 22-10-2008, 17:04

We had an extensive discussion of this matter some months ago that included references to good sources for hose clamps that may be of value to you. Take a look at Check Your "Made in China" Hose Clamps!

Good luck!

s/v HyLyte

22-10-2008, 10:56	#1
Pelagic Registered User Join Date: Oct 2007 Boat: Van Helleman Schooner 65ft StarGazer Posts: 1,510	SS Hose Clamp Contacts Finding good quality SS Hose clamps in the Philippines with stainless screws is almost impossible and if you do find the odd one, they might as well be gold plated! I need to build up my inventory and will order from US or Australia a large assortment. Any recommendations as to manufacturer and supplier? ….thanks!

22-10-2008, 14:47	#2
Boracay Moderator Moderator Join Date: Feb 2004 Location: nr Blackwattle Bay,Sydney, NSW, Australia Boat: Steel Roberts Offshore 44 Posts: 1,879	Wham, bam, thank you Mam... I have found that buying hose clamps in Australia is very much a case of take what you are given and like it, with no single source supplying all sizes. The ones that I have brought have been expensive and of unknown quality, particularly the large (around 102mm) "superclamps". If you can get an order to one of the reputable manufacturers in the USA I'd go that way. __________________ Rust never sleeps Boracay Blog.

22-10-2008, 17:04	#4
svHyLyte Registered User Join Date: Mar 2006 Location: Tampa Bay area, USA Boat: Beneteau First 42 Posts: 993	We had an extensive discussion of this matter some months ago that included references to good sources for hose clamps that may be of value to you. Take a look at Check Your "Made in China" Hose Clamps! Good luck! s/v HyLyte __________________ "It is not so much for its beauty that the sea makes a claim upon men's hearts, as for that subtle something, that quality of air, that emanation from the waves, that so wonderfully renews a weary spirit."

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Double Hose Clamps ?	GordMay	Construction, Maintenance & Refit	41	19-10-2009 14:57
Which sanitation hose to buy?	Carol Delfaus	Plumbing Systems and Fixtures	5	06-06-2008 04:52
Best wastewater hose to use	KevinE	Plumbing Systems and Fixtures	19	18-10-2007 14:11
Vent Hose Whistle	stuffinbox	Construction, Maintenance & Refit	2	07-11-2006 02:50
US hose on metric hose barb	coot	Construction, Maintenance & Refit	5	04-03-2006 20:22

22-10-2008, 14:56	#3
btrayfors Senior Cruiser Join Date: Jul 2006 Location: Chesapeake Region Boat: 42' Bob Perry sloop, "Born Free" Posts: 1,241	AWAB brand hose clamps are 316 stainless steel. Lots of places sell them. Try, e.g., Defender: Awab Hose Clamps Bill