Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 17-04-2017, 09:52   #1
Registered User
 
admiralslater's Avatar

Join Date: Sep 2014
Location: Toronto summer rest somewhere else
Boat: Outremer 45/pdq36
Posts: 1,169
Putting the head to bed

I am about to store my new electric head (fresh water) for the first time . It is in Grenada so it's hot. Any tips on storage ie bowl empty/full ,run vegged oil to lib the pump vanes etc . Vinegar rinse .
Any thoughts appreciated
admiralslater is offline   Reply With Quote
Old 17-04-2017, 09:56   #2
Moderator Emeritus
 
a64pilot's Avatar

Cruisers Forum Supporter

Join Date: Oct 2013
Location: Jacksonville/ out cruising
Boat: Island Packet 38
Posts: 31,351
Re: Putting the head to bed

Fill it full with fresh water, I mean full to the brim, then pump it out, maybe a few times too much can't hurt.
This is to flush out the hose etc. Leave bowl with fresh water in it, the water will keep bad odors from coming back up the hose. Being as its hot, I'd leave the bowl half full.
I don't like pumping chemicals etc through the thing myself.

On edit, I'd flush / rinse the tank as well as I could too.
a64pilot is offline   Reply With Quote
Old 17-04-2017, 10:39   #3
Marine Service Provider
 
peghall's Avatar

Join Date: Feb 2011
Posts: 3,021
Re: Putting the head to bed

First, pump out or dump your holding tank and THOROUGHLY flush it out to get rid of any sludge. It's not hard, especially if you have a macerator pump, and you don't have to fill the tank to do this..even easier if you also have a washdown pump--which can be sea water. Put enough water into the tank via the deck pumpout fitting--'cuz that sends the water into the tank at the bottom to stir up any sludge so it can be pulled out-- to cover the bottom to a depth of 6-8"...leave the water running while you turn on the macerator. Let both run till you see only clean water, nothing cloudy. Then switch to fresh water just long enough to rinse the sea water out of the discharge hose and macerator. If you don't have a washdown pump, you'll have to add water with a hose (NOT the hose you use to fill your water tank!)...follow the same directions.

Next run plenty of clean water through your toilet to rinse it and the toilet discharge hose out.

Follow any directions for laying up your fresh water system.

That's all you need to do...you don't need any lubrication or vinegar, and any water left sitting in the bowl will only stagnate and evaporate in the heat, leaving you with a bowl cleaning job. When you return, just start up both system the same way you did the first time you used the toilet.
__________________
© 2024 Peggie Hall
Specializing in marine sanitation since '87.
Author "The NEW Get Rid of Boat Odors"
peghall is offline   Reply With Quote
Old 17-04-2017, 14:42   #4
Registered User
 
admiralslater's Avatar

Join Date: Sep 2014
Location: Toronto summer rest somewhere else
Boat: Outremer 45/pdq36
Posts: 1,169
Re: Putting the head to bed

thank you, that is about what I thought
admiralslater is offline   Reply With Quote
Reply

Tags
bed, head


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
C-Head, Natures Head or Air Head- which is best overall Ram Plumbing Systems and Fixtures 49 26-11-2018 14:01
Putting a boat to bed Valiant173 Liveaboard's Forum 2 01-05-2015 17:46
Converting the Cockpit into a Bed Hankthelank Monohull Sailboats 6 24-07-2009 21:21
Some Days - Stay in Bed! Ex-Calif The Sailor's Confessional 13 15-06-2009 01:53
Truck Bed Liner Paint Jmolan Construction, Maintenance & Refit 15 02-05-2009 18:40

Advertise Here


All times are GMT -7. The time now is 03:14.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.