Cruisers Forum
 


Join CruisersForum Today

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 25-04-2018, 06:27   #1
Registered User

Join Date: Mar 2016
Posts: 63
Jabsco conversion pump not pumping water into bowl ?

Had some good info from others on this project . ?
I did not replace manual with electric . My motor was NG
Found a good deal on ebay . New old inventory including bowl
Same model Jabsco Conversion electric pump
Had few days too return . Did not want too rush job ,Wired too head wiring and motor ran . GOOD
Weeks later I did install Now having a issue
No water pumping into bowl ?
This is a question for techs at Jabsco but no human contact on their site
Maybe you folks can guide me
Fresh water goes from holding tank into top portion of conversion pump . ?
When I turn too fill portion it should pull water from holding tank into bowl .
Not too burn out impeller I fill bowl with water from shower hose . Motor chops it and goes into waste tank .
Opened top portion of conversion and impeller is new , turns fine
There is another impeller on bottom of conversion , would that effect water into bowl ? Have not removed conversion pump too check for bottom impeller. Since this pump was new old inventory never thought of checking impellers .
Does the top portion ( impeller )of conversion pump pull fresh water
Tank is full
I primed by adding water into fresh water hose and nothing . Don't believe any blockage in water hose but will check further
thanks as usual
__________________

Al B is offline   Reply With Quote
Old 25-04-2018, 09:35   #2
Marine Service Provider
 
peghall's Avatar

Join Date: Feb 2011
Posts: 2,049
Re: Jabsco conversion pump not pumping water into bowl ?

From your description it appears your conversion is the Jabsco 29200 Jabsco 29200_Electric_Conversion It doesn't draw from the water tank--and don't even THINK of trying to connect that toilet or any other sea water toilet to it!--it uses sea water, same as your manual toilet did, which means the seacock on the intake thru-hull needs to be open. The owners manual should give you information you need to get it installed correctly and working the way it should. Jabsco 29200_Electric_Conversion

Peggie
"If you can't explain it to a six year old, you don't completely understand it yourself." --Albert Einstein
__________________

__________________
2019 Peggie Hall
Specializing in marine sanitation since '87.
Author "The NEW Get Rid of Boat Odors"
peghall is online now   Reply With Quote
Old 27-04-2018, 04:52   #3
Registered User

Join Date: Mar 2016
Posts: 63
Re: Jabsco conversion pump not pumping water into bowl ?

Peg
thank you for responding
you were correct .
Boat was on the hard when I installed new conversion pump .
Prior too motor burning out old conversion pump filled bowl but I was in water.
I always assumed water that filled bowl was fresh water from holding tank
My past questions which you responded too was flushing holding tank , cleaning , odors .
Put boat into water yesterday, and BINGO water entered bowl when fill was activated .
I am so used too simple projects becoming major that I assumed the worst.

THANK YOU
AL B
Al B is offline   Reply With Quote
Old 27-04-2018, 11:06   #4
Marine Service Provider
 
peghall's Avatar

Join Date: Feb 2011
Posts: 2,049
Re: Jabsco conversion pump not pumping water into bowl ?

If you ran it very much before the boat went into the water, it's possible that dry friction heat may have "fried" the intake impeller. You'll know whether you did if the toilet decides to stop pulling in water in only a short time after you've gotten it working. See the owners manual (I sent you the link to it in my previous reply) for information on how to replace it.

Peggie
__________________
2019 Peggie Hall
Specializing in marine sanitation since '87.
Author "The NEW Get Rid of Boat Odors"
peghall is online now   Reply With Quote
Reply

Tags
jabsco, water

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Jabsco toilet backflow from tank into bowl Jimongee Our Community 19 04-07-2017 00:03
Jabsco manual toilet base-to-bowl o-ring material ErikFinn Plumbing Systems and Fixtures 14 14-01-2017 08:48
Jabsco not pumping sea water akpiperandjane1 Plumbing Systems and Fixtures 7 10-07-2016 18:00
Injector pump not pumping to 2 injectors msponer Engines and Propulsion Systems 21 06-12-2015 09:23
Water not getting to bowl from pump Capt Kirk Plumbing Systems and Fixtures 0 18-09-2012 00:30



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 12:35.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.