Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 26-10-2015, 01:46   #1
Registered User

Join Date: Jul 2011
Posts: 341
Hydranautics RO membranes

Hydranautics model SWC6-4040 - 4" x 40" elements

Any experience with these as they look interesting

Most interesting is the published 10% recovery rate at 600 psi

Max feed rate 16 gal/min
Low Pressure (600 PSI)
Permeate Flow:1,250 gpd (4.7 m3/d)
Salt Rejection: 99.6% (99.4 % min)
Boron Rejection (avg):83%

High Pressure (800 PSI):
Permeate Flow:2,500 gpd (7.2 m3/d)
Salt Rejection: 99.7% (99.5% min)
Boron Rejection (avg):91%
Hoghead is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Housing for Watermaker Membranes Mark10 Plumbing Systems and Fixtures 24 02-08-2014 21:51
Winterizing RO membranes phorvati Plumbing Systems and Fixtures 1 26-09-2012 22:39
Orientation of Membranes in Schenker 60 RO bludden Plumbing Systems and Fixtures 3 29-02-2012 07:32
Testing Membranes wingover Plumbing Systems and Fixtures 16 15-01-2011 09:03
Village Marine Membranes phi3984 Plumbing Systems and Fixtures 5 16-05-2009 06:07

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 16:57.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.