Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 03-06-2015, 15:11   #16
Registered User

Join Date: Feb 2011
Posts: 41
Re: Broken AC - Re-install myself?

normally into the bilge but increasingly the preference is a dry bilge, so in that case a sump pump.
__________________

__________________
bobw100ton is offline   Reply With Quote
Old 03-06-2015, 15:15   #17
Registered User

Join Date: Nov 2005
Location: 5 Mile River
Boat: Bristol 41.1 Keep on Dancin'
Posts: 536
Re: Broken AC - Re-install myself?

Many that I have seen, along with my own, have been discharged overboard, seperate, obviously from the water cooling.
__________________

__________________
keepondancin is offline   Reply With Quote
Old 03-06-2015, 15:22   #18
Registered User

Join Date: Feb 2011
Posts: 41
Re: Broken AC - Re-install myself?

My apologies, I thought you were asking about the condensate water, not the condenser cooling water. Yes, the condenser seawater flow always goes overboard.
__________________
bobw100ton is offline   Reply With Quote
Old 04-06-2015, 06:55   #19
Registered User

Join Date: Mar 2008
Posts: 51
Re: Broken AC - Re-install myself?

When I replaced my 01 Sea Ray A/C the newer model wired up easily but kicks off after a few minutes with a low voltage signal. I tried resetting my original controller which didn't work and now I am going to have to figure out how to recalibrate the voltage sensor. Of course I managed to lose the new control unit as the thing appeared to work fine when I installed it in the Fall. I think I can reprogram the controller with the voltage I am actually seeing at the A/C unit. Not as plug n play as I hoped.
__________________
Thenaz007 is offline   Reply With Quote
Old 04-06-2015, 07:19   #20
Registered User

Join Date: Feb 2011
Posts: 41
Re: Broken AC - Re-install myself?

Sea Ray uses Dometic units, I'm not aware of any that have required recalibration on voltage, but it is common for Low and High Pressure Cut Outs to cycle depending on refrigerant charge, air flow restriction or sea water flow.
__________________

__________________
bobw100ton is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Through Hull-Valve Broken or Not-Broken? Jado27 Monohull Sailboats 15 16-03-2016 07:14
Introducing myself pegsue Meets & Greets 0 21-08-2005 03:57
Allow me to introduce myself austi012 Meets & Greets 2 31-07-2005 12:35
Intro myself Matt Hager Meets & Greets 1 23-07-2005 09:24
Introducing Myself GreyDawn Meets & Greets 1 20-06-2005 05:48



Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 15:12.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.